Installing the hard drive
Steps
1. Insert the hard drive assembly into its slot on the computer.
2. Tighten the screws that secure the hard drive to the computer
3. Connect the hard drive cable to the connector on the system board.
4. Install the:
a. battery.
b.
back cover
5. Follow the procedure in
Removing the hard drive cable
Steps
1. Follow the procedure in
2. Remove the:
a.
back cover
b.
battery
c.
hard drive
3. Disconnect the hard drive cable from the connector on the hard drive.
After working inside your computer
Before working inside your
computer.
Disassembly and reassembly
19