Post Behavior Screen Options - Dell Vostro 14-5468 Owner's Manual

Option Description
Advanced This option enables you to maximize the battery health. By enabling this option, your system uses the
Battery Charge standard charging algorithm and other techniques, during the non-work hours to improve the battery
Configuration health.
● Enabled Advanced Battery Charge Mode
Default setting: Disabled
Primary Allows you to select the charging mode for the battery. The options are:
Battery Charge
● Adaptive
Configuration
● Standard — Fully charges your battery at a standard rate.
● ExpressCharge — The battery charges over a shorter period of time using Dell's fast charging
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.

POST Behavior screen options

Option Description
Adapter Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
Warnings adapters.
Default setting: Enable Adapter Warnings
Keypad Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
(Embedded)
● Fn Key Only: This option is enabled by default.
● By Numlock
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Key Emulation Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:
● Fn Lock. This option is selected by default.
● Lock Mode Disable/Standard
● Lock Mode Enable/Secondary
MEBx Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
Default Setting: Enable MEBx Hotkey
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
● Minimal
● Thorough (default)
● Auto
Extended BIOS Allows you to create an additional preboot delay. The options are:
POST Time
● 0 seconds. This option is enabled by default.
● 5 seconds
● 10 seconds
technology. This option is enabled by default.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
NOTE: When setup is running, this option has no effect. Setup works in Fn Key Only mode.
System setup options 71