Installing the WLAN card
Steps
1. Insert the WLAN card into the connector at a 45–degree angle.
2. Close the plastic cover over the WLAN card.
3. Tighten the screw to secure the WLAN card to the computer.
4. Connect the antenna cables to the connectors marked on the WLAN card.
5. Install the:
a. battery.
b.
back
cover.
6. Follow the procedure in
Removing the coin cell battery
Steps
1. Follow the procedure in
2. Remove the:
a.
back cover
b.
battery
3. To remove the coin cell battery:
a. Pry the coin cell battery upwards from its slot using a scribe [1] .
22
Disassembly and reassembly
After working inside your computer
Before working inside your
computer.