Removing the camera
Steps
1. Follow the procedure in
2. Remove the :
a.
back cover
b.
battery
c.
LED board
d.
WLAN card
e.
system fan
f.
display assembly
g.
display bezel
3. To remove the camera:
a. Disconnect the camera connector cable [1].
b. Lift to remove the camera from the computer [2].
Installing the camera
Steps
1. Align the camera to its slot on the display panel.
2. Connect the camera cable to its connector on the display panel.
3. Install the:
a.
display bezel
b.
display assembly
c.
system fan
d.
WLAN card
e.
LED board
40
Disassembly and reassembly
Before working inside your
computer.