Dell Vostro 14-5468 Owner's Manual page 59

Table 5. Main (continued)
CPU ID
L1 Cache
L2 Cache
L3 Cache
Fixed HDD
mSATA Device
System Memory
Extended Memory
Memory Speed
Table 6. Advanced
Intel SpeedStep
Virtualization
Integrated NIC
USB Emulation
USB Powershare
SATA Operation
Adapter Warnings
Function Key Behavior
Intel Smart Connect Technology
Intel Rapid Start Technology
Miscellaneous Devices
Battery Health
Table 7. Security
Set Asset Tag
Set Admin Password
Set System Password
Set HDD Password
Password Change
Password Bypass
Displays the processor ID.
Displays the processor L1 cache size.
Displays the processor L2 cache size.
Displays the processor L3 cache size.
Displays the model number and capacity of the hard drive.
Displays the model number and capacity of the optical drive.
Displays the memory in-built on the computer.
Displays the memory installed on the computer.
Displays the memory speed.
Enable or disable the Intel SpeedStep
feature.
Enable or disable the Intel Virtualization
feature.
Enable or disable the power supply to the
on–board network card.
Enable or disable the USB emulation
feature.
Enable or disable the USB powershare
feature.
Change the SATA controller mode to
either ATA or AHCI.
Enable or disable the Adapter Warnings.
Specifies the behavior of the function key
<Fn>.
Enable or disable Intel Smart Connect
Technology.
Enable or disable Inter Rapid Start
Technology.
These fields let you enable or disable
various on-board devices.
Displays a message about the battery
health.
This field displays your system's asset tag. If the asset tag is not already set, this field
can be used to enter it.
Allows you to change or delete the administrator password.
Allows you to change or delete the system password.
Allows you to set a password on the computer's internal hard drive (HDD).
Allows you to change the security password.
Allows you to bypass the system password and the internal HDD password prompts
during a system restart/resume from hibernate state.
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: AHCI
Default: Enable
Default: Function key
Default: Enable
Deafult: Enable
System Setup 59