NOTE:
Depending on the laptop and its installed devices, the items listed in this section may or may not appear.
General screen options
This section lists the primary hardware features of your computer.
Option
Description
System
This section lists the primary hardware features of your computer.
Information
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels
Mode, Memory technology
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed,
Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable,
and 64-bit technology.
● Device Information: SATA M.2 SSD, Video Controller, Video BIOS Version, Video Memory, Panel Type,
Native Resolution, Audio Controller, WiFi Device, WiGig Device, Cellular Device, Bluetooth Device.
Battery
Displays the battery status and the type of AC adapter connected to the computer.
Information
Boot Sequence
Allows you to change the order in which the computer attempts to find an operating system.
● Windows Boot Manager or UEFI
● Legacy or UEFI
Boot Options
This option allows you the legacy option ROMs to load. By default, the Enable UEFI Network Stack is
disabled.
Date/Time
Allows you to change the date and time.
System Configuration screen options
Option
Description
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI
● RAID On: This option is enabled by default.
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
● SATA M.2 SSD
SMART
This field controls whether hard drive errors for integrated drives are reported during system startup. This
Reporting
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
● Enable SMART Reporting
USB
This is an optional feature.
Configuration
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to
boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
66
System setup options
System setup options
7