a. Remove the screws that secure the heatsink module to the computer chassis.
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6, 7]. Except for screws [5,6,7] the rest
of the screws are retention screws and cannot be fully removed
b. Remove the heatsink module from the slot on the system board [8].
Installing the heatsink
Steps
1. Place the heatsink module into its slot on the system board.
2. Tighten the screws to secure the heatsink module to the computer.
NOTE:
Secure the screws in the order of the callout numbers [1, 2, 3, 4] as seen on the heatsink module. Tighten the
rest of the screws.
3. Install the:
a.
system fan
b.
battery
c.
back cover
4. Follow the procedure in
Removing the LED board
Steps
1. Follow the procedure in
2. Remove the:
a.
back cover
After working inside your computer
Before working inside your
computer.
Disassembly and reassembly
27