Installing The Touchpad; Removing The System Board - Dell Vostro 14-5468 Owner's Manual

Installing the touchpad

Steps
1. Align the touchpad with the computer chassis.
2. Tighten the screws that secure the touchpad.
3. Place the touchpad bracket over the touchpad and install the screws to secure it.
4. Install the touchpad connector cables and affix the adhesive tape.
5. Install the:
a. WLAN card
b. battery
c. back cover
6. Follow the procedure in

Removing the system board

Steps
1. Follow the procedure in
2. Remove the:
a. back cover
b. battery
c. SSD bracket
d. SSD
e. WLAN card
f. system fan
g. heat sink
h. display assembly
3. Lift the tab [1,2,3,4,6] to disconnect the cables [5] from their connectors on the system board.
32 Disassembly and reassembly
After working inside your computer
Before working inside your computer.