What to do in the event of malfunctions
Troubleshooting
For your safety
System malfunctions
Malfunction
No function at all.
Page 126
•
Many malfunctions are detected automatically. Therefore, pay attention
to the error messages displayed on the 5.7" control panel (see page 129).
•
If there is a failure you cannot repair using the instructions from the chap-
ter "What to do in the event of malfunctions", attach a sign "Out of order"
to the system and inform ZEISS Service.
Possible cause
Power plug of stand not
inserted.
Power switch of stand not
switched on.
Automatic circuit breaker
in the stand power switch
is being triggered.
Power failure.
OPMI Lumera
Remedy
Plug in the power cord.
Press power switch.
Green indicator light in the
power switch must be lit.
Press the power switch
again.
Contact in-house
electrician.
®
i on floor stand
Reference
Page 80
Page 93
Page 93
-
Version 9.2
G-30-1720-en