Toyota PRIUS 2023 Manual page 99

RSA (Road Sign
■
Assist) (if equipped)
(P.257)
Select to set up the following
items.
 Road Sign Assist on/off
Select to enable/disable the RSA
(Road Sign Assist).
 "Notification Method"
Select to change each notification
method used to notify the driver
when the system recognizes
excess speed and Do Not Enter
sign.
 "Notification Level"
Select to change each notification
level used to notify the driver when
the system recognizes excess
speed.
DRCC (P.259)
■
Select to set up the following
items.
 "Acceleration Setting"
Select to change the setting for
when vehicle accelerates until the
set vehicle speed is reached.
 "Guide message"
Select to enable/disable the guide
message display. (P.262)
 "Curve Speed Reduction"
Select to change the curve speed
reduction function setting.
(P.266)
Vehicle Settings
■
 Driver Break Suggestion
(P.245)
2-1. Instrument cluster
Select to enable/disable the
drive break suggestion.
 LCA (Lane Change Assist) (if
equipped) (P.239)
Select to enable/disable Lane
Change Assist system.
 FCTA (Front Cross Traffic
Alert) (if equipped) (P.254)
Select to change the settings for
Front Cross Traffic Alert system.
 "TPWS setting" (Tire Pres-
sure Warning System)
(P.427)
• "Tire Set Switching"
Select to register the tire pressure
warning system sensor ID code set.
(P.436)
• "Tire Rotation"
Select to register the position of
each wheel after performing a tire
rotation. (P.430)
• "Tire Pressure Setting"
Select to perform the tire inflation
pressure setting procedure of the
tire pressure warning system.
(P.431)
• "Pressure unit setting"
Select to change the units of
measure displayed. (P.539)
 PBD (Power Back Door)
(if equipped) (P.122)
Select to set up the following items.
• System settings
Select to enable/disable the power
back door system.
• "Opening Adjustment"
Select the open position when
99
2
OwnersManuals2.com