Toyota PRIUS 2023 Manual page 188

188
4-2. Driving procedures
NOTICE
● When the warning message
indicating the shift control sys-
tem appears on the multi-infor-
mation display. (P.475)
● The display indicates that no
shift position is selected for
more than a few seconds.
Shift position display and
how to change the shift
position
A Shift lever
Operate the shift lever gently and
securely in the direction of the
arrow on the shift position indicator.
To shift to N, slide the shift lever in
the direction of the arrow and hold
it.
Release the shift lever after each
shifting operation to allow it to
return to its regular position (
Shifting to B is only possible when
the shift position is in D.
When shifting from P to N, D or R,
from N, D, B or R to P, from D or B
to R, or from R to D, ensure that the
brake pedal is being depressed and
the vehicle is stationary.
B Shift position indicator
Meter display:
The current shift position is illumi-
nated.
Shift lever display:
The current shift position is illumi-
nated.
When selecting the shift position,
make sure that the shift position
has been changed to the desired
position by checking the shift posi-
tion indicator provided on the
instrument cluster.
C
P position switch
Fully stop the vehicle and set the
parking brake, and then press the P
position switch.
When the shift position is changed
to P, the switch illuminates.
Check that the shift position indica-
tor shows P.
■ Changing the shift position in
each power switch mode
● The shift position cannot be
changed when the power switch is
in ACC or off.
● When the power switch is in ON, if
the READY indicator is not illumi-
nated, the shift position can only
be changed to N.
● When the READY indicator is illu-
minated, the shift position can be
changed from P to D, N, or R.
● When the READY indicator is
flashing, the shift position cannot
).
be changed from P to any other
OwnersManuals2.com