Toyota PRIUS 2023 Manual page 295

mation display.
Turning the RCTA func-
tion on/off
The RCTA can be enabled/dis-
abled on of the multi-infor-
mation display. (P.538)
When the RCTA function is off,
the driving assist information
indicator (P.84) will illuminate
and a message will be displayed
on the multi-information display.
Each time the power switch is
turned to ON, the RCTA function
is enabled.
■ Outside rear view mirror indica-
tor visibility
In strong sunlight, the outside rear
view mirror indicator may be difficult
to see.
■ Hearing the RCTA buzzer
The RCTA buzzer may be difficult to
hear over loud noises, such as if the
audio system volume is high.
■ Rear side radar sensors
P.276
RCTA function
Operation of the RCTA
■
function
The RCTA function uses rear
side radar sensors to detect
vehicles approaching from the
right or left at the rear of the
vehicle and alerts the driver of
the presence of such vehicles
by flashing the outside rear view
mirror indicators and sounding a
4-5. Using the driving support systems
buzzer.
A
B
■
When a vehicle approaching
from the right or left at the rear
of the vehicle is detected, the
following will be displayed on
the Multimedia Display.
• Example: Vehicles are
■
The areas that vehicles can be
detected in are outlined below.
Approaching vehicles
Detection areas of approach-
ing vehicles
RCTA icon display
approaching from both sides
of the vehicle
RCTA function detection
areas
295
4
OwnersManuals2.com