Toyota PRIUS 2023 Manual page 97

displayed on the screen can be
changed by using the meter
control switches.
Setting procedure
■
1
Operate or
meter control switches and
select .
2
Operate or
meter control switches and
select the desired item.
• If the function is turned on and
off or the volume, etc. is
changed on the setting
screen, the setting is changed
each time
• For functions that allow oper-
ation contents, display con-
tents, etc., of function to be
selected, the setting screen is
displayed by pressing and
holding . When the setting
screen is displayed, select the
setting or desired value (time,
etc.) with .
3
After changing the settings,
press of the meter control
switches.
LDA (Lane Departure
■
Alert) (P.242)
Select to set up the following
items.
 Lane Departure Alert on/off
Select to enable/disable Lane
Departure Alert system.
 "Alert Options"
Select to set the alert type.
of the
of the
is pressed.
2-1. Instrument cluster
 "Alert Timing"
Select to set the alert timing.
BSM (Blind Spot Moni-
■
tor) (if equipped) (P.275)
Select to set up the following
items.
 BSM (Blind Spot Monitor)
on/off
Select to enable/disable the
BSM system.
 "Support timing"
Select to change the alert tim-
ing for an approaching vehi-
cle.
 "Brightness"
Select to switch the bright-
ness of the outside rear view
mirror indicators. (P.275)
 "Buzzer alert"
Select to enable/disable the buzzer
alert which sounds when BSM sys-
tem is operated.
PCS (Pre-Collision Sys-
■
tem) (P.222)
Select to set up the following
items.
 PCS on/off
Select to enable/disable the
pre-collision system.
 "Warning timing"
Select to change the pre-colli-
sion warning timing.
PDA (Proactive driving
■
assist) (P.248)
 PDA on/off
Select to enable/disable the PDA
97
2
OwnersManuals2.com