498
7-2. Steps to take in an emergency
Flat tire
Wheel chock positions
Rear left-
In front of the front
hand side
right-hand side tire
Rear right-
In front of the front
hand side
left-hand side tire
2
For vehicles with the wheel
ornament: Remove the wheel
ornament using the wrench.
To prevent damage, cover the tip of
the wrench with a rag.
3
Using a wheel nut wrench,
slightly loosen the wheel nuts
(approximately one turn).
4
Turn the tire jack portion
by hand until the notch of the
jack is in contact with the jack
point.
5
Assemble the jack handle
and the wheel nut wrench as
shown in the illustration.
6
Raise the vehicle until the tire
is slightly raised off the
ground.
A
7
Remove all the wheel nuts
and the tire.
When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
OwnersManuals2.com