Toyota PRIUS 2023 Manual page 428

428
6-3. Do-it-yourself maintenance
(Ways of coping: P.469, 524)
 When "Immediately Check
tire when Safe" is displayed
(Emergency Warning)
The tire pressure warning light
comes on and a buzzer sounds
when the tire inflation pressure
becomes low suddenly due to a
blowout. (Ways of coping: P.469,
483, 495)
However, the system may not be
able to detect sudden tire ruptures
(bursting, etc.).
 The tire pressure detected by
the tire pressure warning sys-
tem can be displayed on the
multi-information display.
(P.92)
The illustration used is intended as
an example, and may differ from
the image that is actually displayed
on the multi-information display.
How to change the unit
■
1
Park the vehicle in a safe
place and turn the power
switch off.
Changing the unit cannot be per-
formed while the vehicle is moving.
2
Start the hybrid system.
3
Use the meter control
switches (P.92) to select
(P.93).
4
Use the meter control
switches to select
press .
5
Use the meter control
switches to select "TPWS
setting", then press
6
Use the meter control
switches to select "Pressure
unit setting", then press
7
Use the meter control
switches to select the desired
unit and then press
■ Routine tire inflation pressure
checks
The tire pressure warning system
does not replace routine tire inflation
pressure checks. Make sure to
check tire inflation pressure as part
of your routine of daily vehicle
checks.
■ Tire inflation pressure
● It may take a few minutes to dis-
play the tire inflation pressure
after the power switch is turned to
ON.
It may also take a few minutes to
display the tire inflation pressure
after inflation pressure has been
adjusted.
● Tire inflation pressure changes
with temperature. The displayed
values may also be different from
the values measured using a tire
pressure gauge.
, then
.
.
.
OwnersManuals2.com