b. Use the data structure to group the data types. Go to PLC data types. Select Add new data
type and add a name for the data type ("SC_data_Type" in the example). Add the Tags and
variables based on the sensor values.
On the Default tag table, add the data structure and select the data type name. Add the
address of the data structure.
11. Select the option Monitor all in the popup menu in the Default table screen. If the connection is
successful, the data from the SC4500 controller shows.
5.4.2 Configure the EtherNet/IP module
Configure the EtherNet/IP and the Telegram data in the controller to send sensor or device data to
the PLC. Refer to
EtherNet/IP Telegram composition
Configure the EtherNet/IP settings as follows:
1. Push the main menu icon, then select Outputs > EtherNet/IP > Telegram.
on page 40.
English 31