Configure The Ethernet/Ip Environment - Hach SC4500 User Manual

Profinet and ethernet/ip modules

Hide thumbs Also See for SC4500:

Table of Contents

16. Select the option Monitor all in the popup menu in the Default table screen. If the connection is

successful, the simulation data from the SC4500 controller shows.

17. When the simulation is successful, stop the simulation on the controller. In the main menu of the

controller select Outputs > PROFINET > Simulation. Set the simulation to off.

5.3.2 Configure the EtherNet/IP environment

Configure the EtherNet/IP Studio 5000 Logix Designer environment as follows:

1. On the SC4500 controller, go to the main menu. Then, select OUTPUTS > EtherNet/IP >

Adressing mode. Select Static.

The option EtherNet/IP shows in the EtherNet/IP menu.

2. Select the EtherNet/IP setting and add the IP address of the controller.

Note: Select Static to manually add the IP address of the controller. Select DHCP mode to automatically add

an IP address using DHCP server. Contact your network administrator for more information.

English 17

Table of Contents