Hach SC4500 User Manual page 15

6. Select the commands Compile and Download to device on the PLC menu.
The SC4500 controller gets the assigned IP address and the Industrial Ethernet Interface web
page is enabled. The Industrial Ethernet Interface web page gives information about the data sent
through Telegram.
7. On the PLC menu, select Accessible devices view. Then, select Flash LED to identify the
SC4500 controller with the installed module.
The controller display will flash.
8. When the controller is identified, unselect the option Flash LED.
9. In a web browser, type the IP address to access the Industrial Ethernet Interface web page. The
message "Telegram not defined!" shows.
English 13