14. Add the inputs modules on the Device overview tab of the PLC based on the Modules
assigned information.
15. Add the tags and variables based on the values that the controller simulation sends. Add the
same settings as in the Industrial Ethernet web page. Refer to the table below.
Tags
1 - Simulation_value
2 - Simulation_Temperature Float
3 - Simulation_Heartbeat
4 - Simulation_Error
5 - Simulation_Status
16 English
Type
Size
Float (Real)
4 bytes
4 bytes
Integer (Uint) 2 bytes
Integer
2 bytes
Integer
2 bytes Slot 3
Slot
Slot size Input address Address
Slot 1
8 bytes
68...75
Slot 2
4 bytes
76...80
2 bytes
80...81
%ID68
%ID75
%IW76
%IW78
%IW80