Advertisement
Accessory
1
2
Retainer
pull out and eurn+/-180
Remarking: When you removing the accessory, such as a bull point, a cutter etc.., follow above
procedure in reverse order.
4. Operation
Prior to operation
1. Power source
Ensure that the power source to be utilized conforms to the power requirements which
specified on the name plate of the hammer.
2. Power switch
Ensure that the power switch is in the position of OFF. If the plug is connected to power
receptacle while the power switch is in ON position, the demolition hammer will start operation
immediately, which can cause serious accident!
Switch operating
10
Advertisement
