JETWAY MI215 Series User Manual page 52

The optional settings: [128M]; [256M]; [Max]
 VMD setup menu
Press [Enter] to make settings for the following sub-items:
Enable VMD controller
Use this item to enable/disable to VMD controller
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Enable VMD Global Mapping
Use this item to enable/disable to VMD global mapping
The optional settings: [Disabled]; [Enabled].
When set as [Disabled], the following sub-items shall appear:
Map this Root Port under VMD
Use this item to Map/UnMap this root port to VMD
The optional settings: [Disabled]; [Enabled].
Root Port BDF details
 PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
HD Audio
Use this item to control detection of the HD-Audio device.
Disabled= HAD will be unconditionally disabled
Enabled= HAD will be unconditionally enabled
The optional settings: [Disabled]; [Enabled].
Onboard Lan1 Controller
Use this item to enable or disable onboard NIC.
The optional settings: [Enabled]; [Disabled].
Onboard Lan2 Controller
Use this item to control the PCI Express root port..
The optional settings: [Disabled]; [Enabled].
System State after Power Failure
Use this item to specify what state to go to when power re-applied after a power
failure (G3 state).
The optional settings: [Always On]; [Always Off]; [Former State].
47