JETWAY MI215 Series User Manual page 51

*Note: optional for MI215 series with Q6700 and R6800 chipset
eDP/LVDS
Use this item to select the active configuration.
The optional settings: [Disabled]; [Enabled]
When set as [Enabled], the following sub-items shall appear:
Panel Type
Use this item to panel type
The optional settings: [800*480 18bit Single]; [800*600 18bit Single]; [800*600 24bit
Single]; [1024*600 18bit Single]; [1024*768 18bit Single]; [1024*768 24bit Single];
[1280*800 18bit Single]; [1280*800 24bit Single]; [1366*768 18bit Single]; [1366*768
24bit Single]; [1440*900 18bit Dual]; [1440*900 24bit Dual]; [1280*1024 24bit Dual];
[1680*1050 24bit Dual]; [1920*1080 24bit Dual]; [eDP].
Backlight Control
Use this item to back light control setting
The optional settings: [PWM Inverted]; [PWM Normal]
Primary Display
Use this item to select which graphics device should be primary display
The optional settings: [Auto]; [IGFX]; [PEG Slot]; [PCH PCIE]
Internal Graphics
Use this item to keep IGFX enabled based on the setup options.
The optional settings: [Auto]; [Disabled]; [Enabled]
Aperture Size
Use this item to select the aperture size
Note: Above 4GB MMIO BIOS assignment is automatically enabled when selecting
2048MB aperture. To use this feature, please disable CSM Support.
The optional settings: [128MB]; [256MB]; [512MB]; [1024MB]
DVMT Pre-Allocated
Use this item to select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used
by the internal graphics device
The optional settings: [32M]; [64M]; [128M]
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphic memory size used by the internal
graphics device
46