JETWAY MI215 Series User Manual page 41

Use this item to USB Power after system shutdown support only disable ERP function
The optional settings: [Disabled]; [Enabled].
 Super IO Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
ERP Support
Use this item to energy-related products function. Disable ERP to active all wake-up
functions.
The optional settings: [Disabled]; [Auto].
 Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [IO=3F8h; IRQ=4]; [IO=3F8h; IRQ=3,4,5,7,10,11];
[IO=2F8h; IRQ=3,4,5,7,10,11]; [IO=3E8h; IRQ=3,4,5,7,10,11]; [IO=2E8h;
IRQ=3,4,5,7,10,11];
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485]
Mode Speed Select
Use this item to RS232/RS422/RS485 Speed Select
The optional settings: [RS232/RS422/RS485=250Kbps]; [RS232=1Mbps,
RS422/RS485=10Mbps].
 Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
Change Settings
36