JETWAY MI215 Series User Manual page 40

Press [Enter] to make settings for the following sub-items:
ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
► Wake-up Function Settings
Wake-up System With Fixed Time
Use this item to enable or disable system wake on alarm event. When enabled,
system will wake on the hr: min: sec specified
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make settings in the following items that appear:
Wake-up Hour
Use this item to select 0-23 for example enter 3 for 3am and 15 for 3pm
Wake-up Minute
Use this item to select 0-59
Wake-up Second
Use this item to select 0-59
Wake-up System with Dynamic Time
*This item will only show when 'Wake-up System With Fixed Time' is set as
[Disabled].
Use this item to enable or disable system wake on alarm event. When enabled,
system will wake on the current time + Increase minute(s)
When set as [Enabled], user can make settings in the following items that appear:
Wake-up Minute Increase
Use this item to select 1-60
PCIE Wake-up from S3-S5
The optional settings: [Disabled]; [Enabled].
USB S3/S4 Wake-up
Use this item to enable or disable USB S3/S4 Wake-up Support only disable ERP
function
The optional settings: [Disabled]; [Enabled].
USB S5 Power
35