JETWAY MI215 Series User Manual page 44

When set as [Enabled], system will detect if COPEN has been short or not (refer to
COPEN jumper setting for Case Open Detection); if Pin 1&2 of COPEN are short,
system will show Case Open Message during POST.
► PC Health Status
Press [Enter] to view current hardware health status, make further settings in
'SmartFAN Configuration' and set value in 'Shutdown Temperature'.
► SmartFAN Configuration
Press [Enter] to make settings for SmartFAN Configuration:
SmartFAN Configuration
CPUFAN Smart Mode
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN Full-Speed Temperature
Use this item to set CPUFAN full speed temperature. Fan will run at full speed when
above this pre-set temperature.
CPUFAN Full-Speed Duty
Use this item to set CPUFAN full-speed duty. Fan will run at full speed when above
this pre-set duty.
CPUFAN Idle-Speed Temperature
Use this item to set CPUFAN idle speed temperature. Fan will run at idle speed when
below this pre-set temperature.
CPUFAN Idle-Speed Duty
Use this item to set CPUFAN idle speed duty. Fan will run at idle speed when below
this pre-set duty.
 Serial Port Console Redirection
Press [Enter] to make settings for the following sub-items:
COM1
Console Redirection
Use this item to Console Redirection enable or disable.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the 'Console Redirection
Settings' screen:
39