Roland VS-2400CD Appendices page 79

EQ (Equalizer)
Sw (Switch)
Low Gain (Low Gain)
Low Freq (Low Frequency)
Low Q
Low Type
Mid Gain (Middle Gain)
Mid Freq (Middle Frequency)
Mid Q (Middle Q)
High Gain
High Freq (High Frequency)
High Q
Hi Type (High Type)
Level (Output Level)
Pshift (Pitch shifter):
Sw (Switch)
Chromatic Pitch
Fine Pitch
FX Lvl (Effect Level)
DirLvl (Direct Level)
Dly(Delay):Adds a delayed sound to the direct sound, adding depth to the sound or creating special effects.
Sw (Switch)
Time (Delay Time)
FBLvl (Feedback Level)
FX Lvl (Effect Level)
DirLvl (Direct Level)
Cho (Chorus):
Sw (Switch)
Rate (Rate)
Depth (Depth)
PreDLY (Pre-Delay)
FX Lvl (Effect Level)
DirLvl (Direct Level)
*1: If Low Type (Lo Type) or High Type (Hi Type) is set to "Shlv (Shlving Type)," the setting for Lo Q or High Q is
invalid.
On, Off
-12– +12 dB
20 - 2000 Hz
0.3–10.0
Shlv, Peak
-12– +12 dB
200–8000 Hz
0.3–10.0
-12– +12 dB
1.4–20.0 kHz
0.3–10.0
Shlv, Peak
0–100
shifts the pitch.
On, Off
-12–12
-100–100
-100–100
-100–100
On, Off
0–1000 ms
-100–100
-100–100
-100–100
Adds spaciousness and thickness to the sound.
On, Off
0.1–10.0 Hz
0–100
0–50 ms
-100–100
-100–100
Turns the equalizer on or off.
Sets the boost/cut amount in the low frequency band.
Sets the center frequency in the low frequency band.
Sets the width of the area around the low frequency that
will be affected by the gain settings.1
Sets the type of the low frequency band equalizer
(Shlving type or peaking type).
Sets the boost/cut amount in the middle frequency band.
Sets the center frequency in the middle frequency band.
Sets the width of the area around the middle frequency that
will be affected by the gain settings.
Sets the boost/cut amount in the High frequency band.
Sets the center frequency in the High frequency band.
Sets the width of the area around the High frequency that
will be affected by the gain settings.1
Sets the type of the High frequency band equalizer (Shlving
type or peaking type).
Sets the volume after passing through the equalizer.
Turns the pitch shifter on or off.
Pitch variation (by semitone)
Pitch variation (by cent)
Sets the volume of the pitch shift sound.
Sets the volume of the direct sound.
Turns the delay on or off.
Sets the time from direct sound until when the delay sound
is heard.
Sets the amount of the delay sound should be returned to
the delay input.
Sets the volume of the delay sound.
Sets the volume of the direct sound.
Turns the chorus on or off.
Sets the rate of modulation.
Sets the depth of modulation.
Sets the time delay from when the direct sound begins until
the processed sound is heard.
Sets the volume of the chorus sound.
Sets the volume of the direct sound.
Algorithm List
*1
*1
79