Roland VS-2400CD Appendices page 69

Rotary
Models a rotary speaker. Behaviors of High and low frequency band Roters can be set up separately, allowing
realistic modeling of unique surging sensation. This effect is suited for organ sounds.
fig.08-32
Input L
Input R
Parameter (full name)
NS (Noise Suppressor):
Sw (Switch)
Thresh (Threshold)
Release (Release)
Ovd (Overdrive):
Sw (Switch)
Gain (Gain)
Level (Level)
Rot (Rotary Speaker):
LRate (Low Rate)
HRate (High Rate)
Noise Suppressor Over Drive
Setting
Mutes noise in the silent mode.
On, Off
0–100
0–100
Adds distortion to the sound.
On, Off
0–100
0–100
Models a rotary speaker.
0.1–10.0 Hz
0.1–10.0 Hz
Output L
Rotary Speaker
Output R
Function
Turns the noise suppressor on or off.
Sets the level to start muting noise.
Sets the time over which the volume will drop to 0 after the
noise starts being muted.
Turns overdrive on or off.
Sets the degree of sound distortion.
Sets the volume of the overdrive sound.
Sets the rotary frequency of the low frequency band roter.
Sets the rotary frequency of the High frequency band roter.
Algorithm List
69