Shortcut Key Operations; Ch Edit/Select/Automix Status Buttons - Roland VS-2400CD Appendices

Shortcut Key Operations

Here is a list of the functions that can be performed by pressing multiple buttons, or using the TIME/VALUE dial in conjunction
with a button.

CH EDIT/SELECT/AUTOMIX STATUS buttons

[AUTOMIX] + [AUTOMIX STATUS] (*1)
[SHIFT] + [CH EDIT]
[CH EDIT] + [CH EDIT] (*2)
(*1) INPUT1-12, INPUT13-16, AUX1-8 MST, TRACK1-12, TRACK13-24, FX1-4 RTN
(*2) Hold down the [CH EDIT] button of an odd-numbered channel, and press the [CH EDIT] button of the next
highest-numbered (even-numbered) channel.
TRACK STATUS buttons
Hold [STATUS]
(When using the Quick Routing screen)
[TRACK STATUS] + [CLEAR]
Transport Control buttons
[SHIFT] + [ZERO (STORE)]
[SHIFT] + [STOP (SHUTDOWN)]
(after shutdown)
[SHIFT] + [PLAY (RESTART)]
[SHIFT] + [REW (PROJECT TOP)]
[SHIFT] + [FF (PROJECT END)]
[REC] + [TRACK STATUS] (1–24)
[STOP] + [TRACK STATUS] (1–24)
Switch the Automix status of each channel (when Automix is "on")
Adjust the each channel faders to set the "0 dB," and the PAN knobs to set the
"Center."
Channel Link mode on/off
To select the source to be recorded to the destination track (Quick Routing).
All track assignments are canceled.
Store current song data to the disk drive
Shutdown
Restart
Moves to the first recorded audio of the project.
Moves to the last recorded audio of the project.
Switch the status to REC (REC indicator blinks red)
Switch the status to PLAY (PLAY indicator lights green)
21