Roland VS-2000 Appendices page 28

Algorithm List
Delay RSS
The right-side, left-side and center Delay sounds can be set separately. As RSS (p. 37) is connected to both the right and left outputs,
the sound image of the sound from the left-side channel is localized at 90˚ to the left and that of the sound from the right-side
channel at 90˚ to the right. The center Delay output can receive the Feedback effect.
fig.08-20
Input L
Input R
Parameter (full name)
DlyRSS (Delay RSS):
Time (Delay Time)
shift (Delay shift)
C.Time (Center Delay Time)
RSS Lvl (RSS Level)
C-Lvl (Center Level)
LF Damp Gain (LF-Damp Gain)
LF Damp Freq (LF-Damp Frequency)
HF Damp Gain (HF-Damp Gain)
HF Damp Freq (HF-Damp Frequency) 1.0–20.0 kHz
FBLvl (Feedback Level)
FX Lvl (Effect Level)
DirLvl (Direct Level)
Phones (Phones)
*1 Refer to the column "Precautions for using RSS" (p. 38).
* The location is fixed; no azimuth or elevation can be specified.
* Refer to the column "Labeling on RSS product package" (p. 38).
28
Direct Level
Feedback Level
L ch Delay
3 Tap Delay
Center Delay
R ch Delay
Direct Level
Setting Function
Gives three-dimensional location to Delay sounds.
0–1200 ms Sets the time from direct sound until when the left and right delay sound is heard.
L1200–0–R1200 ms Sets the balance of the right and left delay times.
0–1200 ms Sets the time from direct sound until when the center delay sound is heard.
0–100 Sets the volume of the RSS sound.
0–100 Sets the volume for the center delay sound.
-36–0 dB Sets the degree of attenuation in the low frequency band for the center delay sound returned to the
input.
50–4000 Hz Sets the frequency at which attenuation in the low frequency band starts for the center delay sound
returned to the input.
-36–0 dB Sets the degree of attenuation in the High frequency band for the center delay sound returned to
the input.
Sets the frequency at which attenuation in the High frequency band starts for the center delay
sound returned to the input.
-100–100 Sets the amount of the center delay sound should be returned to the delay input.
-100–100 Sets the volume of the delay RSS sound.
-100–100 Sets the volume of the direct sound.
Off, On Set to On when you use headphones
Set to Off when you use speakers
RSS
RSS
Output L
Output R
*1