Roland VS-2000 Appendices page 11

■ No Data on the Source Tracks!
The project you have selected contains no data.
■ Operation Canceled!
You have aborted the procedure by pressing [EXIT/NO].
■ Operation Failed!
Processing was halted due to insufficient memory or due to an error that occurred in the disk drive itself. Check your
connections and verify the reliability of your hard drive.
■ Operation Failed! Source Project has Too Many Take Events.
Too many take events exist on the source project. Therefore, it is impossible to execute Track Import.
■ Phase Mismatch!
There is a problem with your disk drive connection. Make sure the disk drive is connected correctly.
■ Project Protected!
Since Project Protect is on, the operation cannot be executed.
■ RHYTHM TRACK: Edit Error! Measure Over.
You have attempted to create Rhythm Arrange exceeding the limitation (up to 999 measure).
■ RHYTHM TRACK: Edit Error! Note Memory Full!
You have consume full of notes (up to 10,000 notes) while creating Rhythm Arrange or Rhythm Pattern.
■ TOC Error!
An error occurred while reading the CD-R/RW disc. There is a problem with the Roland CD recorder (CD-R/RW drive) or the
CD-R/RW disc.
■ Too Many Index!
The CD already has 98 markers, the maximum number of markers it can hold.
■ Too Many Index!
The CD already has 98 markers, the maximum number of markers it can hold.
■ Track 0 Not Found!
There is a problem with the disk drive media or CD. This disk cannot be used by the VS-2000. In some cases, data in the disk
drive can be recovered using the Drive Check operation.
■ Undefined Sense!
■ Unknown Drive Error!
There is a problem with your disk drive connection. Make sure the disk drive is connected correctly.
■ Write Protected!
The disk drive is write-protected.
11