Windows 2000; Windows 2000 Users; Cannot Install/Uninstall/Use The Driver - Edirol UM-1 Owner's Manual

Windows 2000

Cannot install/uninstall/use the driver

Are you logged onto Windows with the appropriate user rights?
In order to install/uninstall/re-install drivers, you must be logged onto Windows as an
Administrator, or other user that is a member of the Administrators group. For more
information regarding this, consult your computer system administrator.
Did you make "Driver Signing" settings?
In order to install/re-install drivers, "File signature verification" needs to be carried out.
Use the following procedure to check.
1.
Open the "Control Panel" and double-click "System."
2.
Click the [Hardware] tab, and then click the [Driver Signing] button. The "Driver Signing
Options" dialog box will appear.
3.
Make sure that "File signature verification" is set to "Ignore." If it is set to "Ignore," click
[OK]. If not, make a note of the current setting; then change it to "Ignore" and click the
[OK] button.
* Caution regarding the "File signature verification" setting
• If the "File signature verification" setting is left at "Warn," the "Digital Signature Not
Found" dialog box will appear during the installation, but you should simply click [Yes]
and continue the installation.
• If the "File signature verification" setting is set to "Block," the "Digital Signature Not
Found" dialog box will appear during the installation; click the [OK] button. "Found
New Hardware Wizard" will appear, so click the [Finish] button to close the wizard,
and re-install as described in 'Is "? USB Device" shown in "Device Manager"?'(p. 35)
4.
Click the [OK] button to close "System Properties."
Check with the driver installed on the computer
If you can't use the UM-1 even though you've installed the driver, the driver might not be
installed correctly. Use the following procedure to check.
1.
Start Windows with all USB cables including the UM-1(but not the mouse or keyboard)
disconnected.
34