Windows 2000 Users - Edirol UM-1 Owner's Manual

Windows 2000 Users

* Only one unit can be used at a time.
* With some computers, starting up Windows with the UM-1 connected can result in
unstable operation. If this happens, you may be able to use the UM-1 by first starting up
Windows with the UM-1 disconnected from the computer, and then afterwards connecting
the UM-1.
* If other programs are running, please exit all of them before you proceed with the
installation.
* If you will be connecting the UM-1 to your computer simultaneously with another Roland
USB-compatible device such as the UA-100, you must disconnect the UA-100 (or other
device) from the USB connector before installing the USB MIDI driver. If you install the
USB MIDI driver while the UA-100 etc. is connected to your computer, the USB MIDI
driver may not be installed correctly.
Installing the USB MIDI Driver
To install the driver, you must log on to Windows as the Administrator or other user with
the privileges of the Administrators group. For more information regarding this, consult
your computer system administrator.
1.
Start Windows with all USB cables including the UM-1(but not the mouse or keyboard)
disconnected.
2.
Log onto Windows as an Administrator, or other user that is a member of the
Administrators group.
3.
Exit all applications before performing the installation.
4.
Open the "Control Panel," and double-click "System."
5.
Click the [Hardware] tab, and then click the [Driver Signing] button. The "Driver Signing
Options" dialog box will appear.
6.
Make sure that "File signature verification" is set to "Ignore." If it is set to "Ignore," click
[OK]. If not, make a note of the current setting; then change it to "Ignore" and click the
[OK] button.
* Caution regarding the "File signature verification" setting
• If the "File signature verification" setting is left at "Warn," the "Digital Signature Not
Found" dialog box will appear during the installation, but you should simply click [Yes]
and continue the installation.
17