Edirol UM-1 Owner's Manual page 24

11.
In the Studio Setup window, place the mouse pointer on the "Port 1" icon, and the pointer
will change to the shape of an eighth note. While the pointer has changed its shape, click
the icon to make sure that sound is produced by the sound module.
* Selecting "Roland UM-1" on the MIDI sequencer software does not generate any sounds
from the sound module connected to the UM-1. Specify "Port 1" to send/receive MIDI
data to/from the equipment connected to the MIDI cable of the UM-1.
* Device icons shown in the dialog may be different depending on your setup.
12.
After verifying that sound is produced from the sound module, select [Quit] from the
"File" menu to exit OMS Setup. A dialog box will appear recommending that you save, so
click [Save].
13.
Re-start your Macintosh.
This completes the setting up OMS.
To learn more about OMS
If you would like to learn more about OMS, please refer to "OMS_2.3_Mac.pdf" (on-
line manual) located in the "UM-1 Drivers"–"UM-1 Driver E"–"OMS"– "OMS 2.3.7"
folder on the CD-ROM. In order to read "OMS_2.3_Mac.pdf," you will need the
Adobe Acrobat Reader. To install it, double-click "Reader Installer" which is found
in the CD-ROM.
24