Edirol UM-1 Owner's Manual page 19

17.
The "System Settings Change" dialog box will appear. Click the [Yes] button and re-start
Windows.
18.
If you changed the setting for "Verify file signature" in step 6, set it back to the previous
setting. (To restore the setting, the Administrator or user belonging to the Administrators
group must log on to Windows.)
19.
As described in "Before you begin" (p. 19), make settings so that the UM-1 can be used. The
UM-1 cannot be used unless these settings are made.
Before you begin
Before you use the UM-1 with the Windows Media Player
1.
Double-click "Sounds and Multimedia" in "Control Panel."
2.
Click the [Audio] tab, and in "MIDI Music Playback," select "1:Roland UM-1 MIDI."
* If the above "1:Roland UM-1 MIDI" cannot be selected, a problem may have occurred.
Refer to "Troubleshooting."(p. 27)
3.
Click the [OK] button to close "Sounds and Multimedia Properties."
4.
Connect the TO MIDI IN cable of the UM-1 to a MIDI sound module (such as the Roland
SC series).
5.
Open "Windows Media Player," select a MIDI file, then play back the file.
Before you use the UM-1 with an application
In the application(s) that you intend to use, specify the MIDI device they are to use. (For
details on this setting, refer to the owner's manual for your application.)
The MIDI device names and their corresponding cables will be as follows:
MIDI OUT device
Roland UM-1 MIDI --- UM-1 TO MIDI IN cable
MIDI IN device
Roland UM-1 MIDI --- UM-1 TO MIDI OUT cable
* If you are unable to select "Roland UM-1 MIDI " in the MIDI settings of the application,
a problem may have occurred. Refer to "Troubleshooting." (p. 27)
19