Gtr Multi 1 (Guitar Multi 1) - Roland SC-8820 Owner's Manual

RT H Slow (RT High Frequency Slow Rate)
Adjusts the speed of the high-range rotor for the slow-
speed setting.
RT H Fast (RT High Frequency Fast Rate)
Adjusts the speed of the high-range rotor for the fast-speed
setting.
RT Hi Accl (RT High Frequency Acceleration)
Adjusts the time over which the rotation speed of the high-
range rotor will change from slow-speed to fast-speed (or
fast-speed to slow-speed) rotation. Smaller values will
require greater time to reach the new rotational speed.
RT Hi Lev (RT High Frequency Level)
Adjusts the volume of the high-range rotor.
RT Sept (RT Separation)
Adjusts the spatial spread of the rotary sound.
#RT Speed
Simultaneously switch the rotational speed of both the low-
range and the high-range rotors.
Slow: Slow down the rotation to the specified
speeds (RT L Slow parameter/RT H Slow
parameter values).
Fast: Speed up the rotation to the specified speeds
(RT L Fast parameter/RT H Fast parameter
values).
Level (Output Level)
Adjusts the output level.

48: GTR Multi 1 (Guitar Multi 1)

Guitar Multi 1 connects Compressor (Cmp), Overdrive or
Distortion (OD), Chorus or Flanger (CF), and Delay (Dly)
effects in series.
fig.9-51
L
Cmp
R
Cmp (Compressor)
Cmp Atck (Compressor Attack)
Adjusts the time over which the sound will rise after input.
Cmp Sus (Compressor Sustain)
Adjusts the time over which low-level sounds are boosted
until they reach a specified volume.
Increasing the value will shorten the time. When the value
is modified, the level will also change.
Cmp Level (Compressor Level)
Adjusts the volume of the compressor sound.
Cmp Sw (Compressor Switch)
Turns the compressor on/off.
0.05–10.0 [12 (40 03 0E)]
0.05–10.0 [13 (40 03 0F)]
0–15 [14 (40 03 10)]
0–127 [15 (40 03 11)]
0–127 [16 (40 03 12)]
Slow/Fast [17 (40 03 13)]
0–127 [20 (40 03 16)]
[04H, 00H]
Delay
OD CF
0–127 [1 (40 03 03)]
0–127 [2 (40 03 04)]
0–127 [3 (40 03 05)]
Off/On [4 (40 03 06)]
OD (Overdrive/Distortion)
OD Sel (OD Select)
Selects either Overdrive or Distortion.
+OD Drive
Adjusts the depth of distortion. The volume will change
together with the depth of distortion.
OD Amp (OD Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [7 (40 03 09)]
Selects the type of guitar amp.
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk: large triple stack amp
OD Amp Sw (OD Amp Switch)
Turns OD Amp on/off.
OD L Gain (OD Low Gain)
Adjusts the low-range gain.
OD H Gain (OD High Gain)
Adjusts the high-range gain.
OD Sw (OD Switch)
Turns Overdrive or Distortion on/off.
CF (Chorus/Flanger)
CF Sel (CF Select)
Selects either Chorus or Flanger.
CF Rate
Adjusts the speed of modulation
CF Depth
Adjusts the depth of modulation.
CF Fb (CF Feedback)
Adjusts the amount (%) of the flanger sound that is
returned to the input. Negative (-) values will invert the
phase.
* In the case of Chorus, this will have no effect.
CF Mix
Adjusts the volume of the chorus or flanger sound.
Dly (Delay)
Dly Time (Delay Time)
Adjusts the time from the original sound until when the
delay sound is heard.
Dly Fb (Delay Feedback Level)
Adjusts the amount of the delay sound that is returned to
the input.
#Dly Mix (Delay Mix)
Adjusts the volume of the delay sound.
Level (Output Level)
Adjusts the output level.
Effects
Odrv/Dist [5 (40 03 07)]
0–127 [6 (40 03 08)]
Off/On [8 (40 03 0A)]
-12–+12 [9 (40 03 0B)]
-12–+12 [10 (40 03 0C)]
Off/On [11 (40 03 0D)]
Chorus/Flangr [12 (40 03 0E)]
0.05–6.40 [13 (40 03 0F)]
0–127 [14 (40 03 10)]
-98%–+98% [15 (40 03 11)]
0–127 [16 (40 03 12)]
0–635ms [17 (40 03 13)]
0–127 [18 (40 03 14)]
0–127 [19 (40 03 15)]
0–127 [20 (40 03 16)]
71