Roland SC-8820 Owner's Manual page 68

Effects
42: EH Flanger (Enhancer
This effect connects an enhancer and a flanger in series.
fig.9-45
L
Enhancer
R
Enhancer
+EH Sens (Enhancer Sensitivity)
Adjusts the sensitivity of the enhancer.
EH Mix (Enhancer Mix Level)
Adjusts the proportion by which the overtones generated
by the enhancer are combined with the direct sound.
FL Dly (Flanger Pre Delay)
Adjusts the time delay from when the direct sound begins
until the flanger sound is heard.
FL Rate (Flanger Rate)
Adjusts the modulation speed of the flanger effect.
FL Depth (Flanger Depth)
Adjusts the modulation depth of the flanger effect.
FL Fb (Flanger Feedback Level)
Adjusts the proportion (%) of the flanger sound that is fed
back into the effect. Negative (-) settings will invert the
phase.
#FL Bal (Flanger Balance)
Adjusts the volume balance between the sound that passes
through the flanger and the sound that does not. With a
setting of D>0E, only the enhancer sound will be output,
and with a setting of D0<E, the enhancer sound that passes
through the flanger will be output.
"D" and "E" stand for "direct sound" and "effect sound"
respectively.
Low Gain
Adjusts the low frequency gain.
Hi Gain (High Gain)
Adjusts the high frequency gain.
Level (Output Level)
Adjusts the output level.
68
Flanger) [02H, 07H]
EQ
Flanger Balance
EQ
0–127 [1 (40 03 03)]
0–127 [2 (40 03 04)]
0–100ms [6 (40 03 08)]
0.05–10.0 [7 (40 03 09)]
0–127 [8 (40 03 0A)]
-98%–+98% [9 (40 03 0B)]
100:0–0:100(D:E) [10 (40 03 0C)]
-12–+12 [17 (40 03 13)]
-12–+12 [18 (40 03 14)]
0–127 [20 (40 03 16)]
43: EH Delay (Enhancer
This effect connects an enhancer and a delay in series.
fig.9-46
L
Enhancer
R
Enhancer
+EH Sens (Enhancer Sensitivity)
Adjusts the sensitivity of the enhancer.
EH Mix (Enhancer Mix Level)
Adjusts the proportion by which the overtones generated
by the enhancer are combined with the direct sound.
Dly Time (Delay Time)
Adjusts the time delay from when the direct sound begins
until the delay sound is heard.
Dly Fb (Delay Feedback Level) -98%–+98% [7 (40 03 09)]
Adjusts the proportion (%) of the delay sound that is fed
back into the delay input. Negative (-) settings will invert
the phase.
Dly HF (Delay HF Damp)
Adjusts the frequency above which delayed sound fed back
to the delay input will be cut. If you do not wish to cut the
high frequencies of the delay feedback, set this parameter to
Bypass.
#Dly Bal (Delay Balance) 100:0–0:100(D:E) [10 (40 03 0C)]
Adjusts the volume balance between the sound that passes
through the delay and the sound that does not. With a
setting of D>0E, only the enhancer sound will be output,
and with a setting of D0<E, the enhancer sound that passes
through the delay will be output.
"D" and "E" stand for "direct sound" and "effect sound"
respectively.
Low Gain
Adjusts the low frequency gain.
Hi Gain (High Gain)
Adjusts the high frequency gain.
Level (Output Level)
Adjusts the output level.
Delay) [02H, 08H]
EQ
Balance
Delay
EQ
0–127 [1 (40 03 03)]
0–127 [2 (40 03 04)]
0–500ms [6 (40 03 08)]
315–8k/Bypass [8 (40 03 0A)]
-12–+12 [17 (40 03 13)]
-12–+12 [18 (40 03 14)]
0–127 [20 (40 03 16)]