Effects
03: Enhancer
The Enhancer controls the overtone structure of the high
frequencies, adding sparkle and tightness to the sound.
fig.9-3
L
Enhancer
Enhancer
R
+Sens (Sensitivity)
Adjusts the sensitivity of the enhancer.
#Mix (Mix Level)
Adjusts the proportion by which the overtones generated
by the enhancer are combined with the direct sound.
Low Gain
Adjusts the gain of the low frequency range.
Hi Gain (High Gain)
Adjusts the gain of the high frequency range.
Level (Output Level)
Adjusts the output level.
04: Humanizer
This adds a vowel character to the sound, making it similar
to a human voice.
fig.9-4
L
Humanizer
R
Drive
Adjusts the depth of distortion.
Drive Sw (Drive Switch)
Turns Drive on/off.
+Vowel
Selects the vowel.
Accel
Adjusts the time over which the sound will move to the
specified Vowel. Smaller values will require more time.
Low Gain
Adjusts the low frequency gain.
Hi Gain (High Gain)
Adjusts the high frequency gain.
Pan (Output Pan)
Adjusts the stereo position of the output sound. L63 is far
left, 0 is center, and R63 is far right.
#Level (Output Level)
Adjusts the output volume.
50
[01H, 02H]
EQ
Mix
EQ
0–127 [1 (40 03 03)]
0–127 [2 (40 03 04)]
-12–+12 [17 (40 03 13)]
-12–+12 [18 (40 03 14)]
0–127 [20 (40 03 16)]
[01H, 03H]
EQ
Pan
0–127 [1 (40 03 03)]
Off/On [2 (40 03 04)]
a/i/u/e/o [3 (40 03 05)]
0–15 [4 (40 03 06)]
-12–+12 [17 (40 03 13)]
-12–+12 [18 (40 03 14)]
L63–0–R63 [19 (40 03 15)]
0–127 [20 (40 03 16)]
Effects that distort the sound (distortion type)
05: Overdrive
This effect creates a soft distortion similar to that produced
by tube amplifiers.
fig.9-5
L
Over
drive
Simulator
R
+Drive
Adjusts the degree of distortion.
Amp Type (Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [2 (40 03 04)]
Select the type of guitar amp.
Small: small amp
BltIn:
single-unit type amp
2-Stk:
large double stack amp
3-Stk:
large triple stack amp
Amp Sw (Amp Switch)
Turns the Amp Type on/off.
Low Gain
Adjusts the gain of the low frequency range.
Hi Gain (High Gain)
Adjusts the gain of the high frequency range.
#Pan (Output Pan)
Adjusts the stereo location of the output sound. L63 is far
left, 0 is center, and R63 is far right.
Level (Output Level)
Adjusts the output level.
06: Distortion
This effect produces a more intense distortion than
Overdrive.
fig.9-6
L
Distortion
R
+Drive
Adjusts the degree of distortion.
Amp Type (Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [2 (40 03 04)]
Selects the type of guitar amp.
Small: small amp
BltIn:
single-unit type amp
2-Stk:
large double stack amp
3-Stk:
large triple stack amp
[01H, 10H]
Amp
EQ
Pan
0–127 [1 (40 03 03)]
Off/On [3 (40 03 05)]
-12–+12 [17 (40 03 13)]
-12–+12 [18 (40 03 14)]
L63–0–R63 [19 (40 03 15)]
0–127 [20 (40 03 16)]
[01H, 11H]
Amp
EQ
Simulator
0–127 [1 (40 03 03)]
Pan