Ph/Rotary (Phaser, Rotary); Ph/Auto Wah (Phaser, Auto-Wah) - Roland SC-8820 Owner's Manual

63: PH/Rotary (Phaser, Rotary)

This connects a Phaser effect in parallel with a Rotary effect.
fig.9-68
L Phaser
R
Rotary
PH (Phaser)
PH Man (Phaser Manual)
Adjusts the center frequency at which the sound will be
modulated.
+PH Rate (Phaser Rate)
Adjusts the modulation speed of the phaser.
PH Depth (Phaser Depth)
Adjusts the modulation depth of the phaser.
PH Reso (Phaser Resonance)
Adjusts the emphasis for the region around the center
frequency specified by the PH Man parameter.
PH Mix (Phaser Mix Level)
Adjusts the proportion of the phase-shifted sound that will
be mixed with the direct sound.
PH Pan (Phaser Output Pan) L63–0–R63 [16 (40 03 12)]
Sets the stereo location of the phaser sound. L63 is far left, 0
is center, and R63 is far right.
PH Level (Phaser Level)
Adjusts the volume of the phaser sound.
RT (Rotary)
RT L Slow (RT Low Frequency Slow Rate)
Adjusts the speed of the low-range rotor for the slow-speed
setting.
RT L Fast (RT Low Frequency Fast Rate)
Adjusts the speed of the low-range rotor for the fast-speed
setting.
RT Lo Accl (RT Low Frequency Acceleration)
Adjusts the time over which the rotation speed of the low-
range rotor will change from slow-speed to fast-speed (or
fast-speed to slow-speed) rotation. Smaller values will
require greater time to reach the new rotational speed.
RT Lo Lev (RT Low Frequency Level)0–127 [9 (40 03 0B)]
Adjusts the volume of the low-range rotor.
RT H Slow (RT High Frequency Slow Rate)
Adjusts the speed of the high-range rotor for the slow-
speed setting.
[11H, 07H]
Pan
Pan
100–8.0k [1 (40 03 03)]
0.05–10.0 [2 (40 03 04)]
0–127 [3 (40 03 05)]
0–127 [4 (40 03 06)]
0–127 [5 (40 03 07)]
0–127 [17 (40 03 13)]
0.05–10.0 [6 (40 03 08)]
0.05–10.0 [7 (40 03 09)]
0–15 [8 (40 03 0A)]
0.05–10.0 [10 (40 03 0C)]
RT H Fast (RT High Frequency Fast Rate)
Adjusts the speed of the high-range rotor for the fast-speed
setting.
RT Hi Accl (RT High Frequency Acceleration)
Adjusts the time over which the rotation speed of the high-
range rotor will change from slow-speed to fast-speed (or
fast-speed to slow-speed) rotation. Smaller values will
require greater time to reach the new rotational speed.
RT Hi Lev (RT High Frequency Level)
Adjusts the volume of the high-range rotor.
RT Sept (RT Separation)
Adjusts the spread of the rotary sound.
#RT Speed
Simultaneously switch the rotational speed of both the low-
range and the high-range rotors.
Slow: Slow down the rotation to the specified
speeds (RT L Slow parameter/RT H Slow
parameter values).
Fast: Speed up the rotation to the specified speeds
(RT L Fast parameter/RT H Fast parameter
values).
RT Pan (RT Output Pan)
Adjusts the stereo position of the rotary sound. L63 is far
left, 0 is center, and R63 is far right.
RT Level
Adjusts the volume of the rotary sound.
Level (Output Level)
Adjusts the output level.

64: PH/Auto Wah (Phaser, Auto-wah)

This connects a Phaser effect and an Auto-wah effect in
parallel.
fig.9-69
L
Phaser
R
Auto Wah
PH (Phaser)
PH Man (Phaser Manual)
Adjusts the center frequency at which the phaser sound will
be modulated.
+PH Rate (Phaser Rate)
Adjusts the modulation speed of the phaser.
PH Depth (Phaser Depth)
Adjusts the modulation depth of the phaser.
Effects
0.05–10.0 [11 (40 03 0D)]
0–15 [12 (40 03 0E)]
0–127 [13 (40 03 0F)]
0–127 [14 (40 03 10)]
Slow/Fast [15 (40 03 11)]
L63–0–R63 [18 (40 03 14)]
0–127 [19 (40 03 15)]
0–127 [20 (40 03 16)]
[11H, 08H]
Pan
Pan
100–8.0k [1 (40 03 03)]
0.05–10.0 [2 (40 03 04)]
0–127 [3 (40 03 05)]
83