Summary of Contents for Roland Studio Canvas SD-80
Page 1
Owner’s Manual Thank you, and congratulations on your choice of the STUDIO Canvas SD-80. Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (Owner’s manual p. 2), “USING THE UNIT SAFELY” (Owner’s manual pp. 3–4), and “IMPORTANT NOTES” (Owner’s manual p.
Page 2
GREEN or GREEN-AND-YELLOW. SD-80 Sound Module Edirol Corporation North America Address :...
• When using the unit with a rack or stand recommended by Roland, the rack or stand must be carefully placed so it is level and sure to remain stable. If not using a rack or...
Page 4
• Before using the unit in a foreign country, consult with your retailer, the nearest EDIROL/Roland Service Center, or an autho- rized EDIROL/Roland distributor, as listed on the "Information" page. • DO NOT play a CD-ROM disc on a conven- tional audio CD player.
IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2, 3 and 4, please read and observe the following: Power Supply • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system).
Editing the parameters ... 31 Editing part parameters... 31 Editing parameters that are common to all parts ... 32 About parameters that can be edited from the SD-80’s panel... 33 Part parameters (GM2 mode, Native mode) ... 33 Part parameters (Native mode) ... 37...
Page 7
Setting the system tempo ... 52 Switching the driver ... 52 Restoring the factory settings... 52 Controlling the SD-80 via MIDI... 53 Controlling the internal sound generator... 53 Switching the sound generator mode... 53 Switching the sound set ... 55 Switching the type of part ...
Page 8
Apple and Macintosh are registered trademark of Apple Computer, Inc. MacOS is a trademark of Apple Computer, Inc. GS ( ) is a registered trademark of Roland Corporation. XG ( ) and XGlite ( ) are trademarks of YAMAHA Corporation.
80 with your computer. Please read this first. • The Owner’s Manual explains how to use all the basic features of the SD-80. After you have made settings for the SD-80 as described in the Getting Started, and have verified that it produces sound correctly, refer to the Owner’s Manual as necessary, depending on the purpose you have in mind.
Use this button to select an effect for the internal sound generator, or to edit effect parameters ("About the sound generator effects" (p. 39)). SYSTEM Button Use this button to make settings that affect the entire SD-80 system ("System-related settings" (p. 49)). PART Buttons Use these buttons to switch the part display.
Page 11
This will light when the SD-80 is operating in USB mode. ("USB mode" (p. 19)) When you connect the SD-80 to your computer via a USB cable, the SD-80 will automatically switch to USB mode. If your computer is not powered-on, or if the USB cable is disconnected, the SD-80 will automatically switch to MIDI mode.
Use a coaxial cable for COAXIAL, and an optical digital cable for OPTICAL. * The digital output transmits the OUTPUT 1 signal. * The signal that is sent from the SD-80's DIGITAL OUT jack may be digitally copied for one or more generations. 21 MIDI OUT/THRU Switch If this is set to [IN1 THRU], the MIDI messages sent to the MIDI IN 1 connector will be retransmitted without change from the MIDI OUT 2 connector.
The SD-80 contains a diverse array of sounds, ranging from instrumental sounds such as piano/organ/ guitar for an ensemble, to sound effects such as birdsong and telephone ringers. Each of these sounds is called an instrument. Here’s how to select instruments and listen to the variety of sounds that the SD-80 provides.
Basic operation ■ Auditioning the sounds (Preview) On the SD-80, sounds are specified using two numbers: the instrument number and the variation number. By pressing [PREVIEW] you can audition the currently selected sound. fig.2-03a Press [PREVIEW]. While you continue pressing [PREVIEW], the button will light and a phrase will play.
■ Adjusting the brightness of the display (Contrast) Immediately after the power is turned on, or after the SD-80 has been used for an extended period, or depending on the conditions in which it is placed, the characters or icons in the display screen may become difficult to read.
It uses the same instrument files and sound sets as GM2 mode, and provides a greater number of editable parameters. In addition, it provides two special sound sets that collect the most distinctive of the sounds of the SD-80. GS mode This sound generator mode supports the “GS”...
MFX. Special This sound set can be used only in Native mode. It consists mainly of the best sounds of the SD-80 from the Enhanced set, and also includes highly original sounds not defined by GM2. As with the Enhanced set, most sounds use multi-effects (MFX).
Using the internal sound generator About parts and sounds The SD-80 is able to produce 32 different sounds at once. A sound generator such as the SD-80 that is able to produce many different sounds simultaneously is called a “multitimbral sound module.” “Timbre”...
Specifying the function of the MIDI connectors The SD-80 has two modes in which MIDI data is transferred differently: USB mode and MIDI mode. The mode is switched automatically depending on the connector you use. ■ USB mode fig.7-2 MIDI messages received at the MIDI IN connectors will not be passed directly to the internal sound generator.
* If you want to change the correspondence of Parts to MIDI channels, you can send the System Exclusive message Rx.CHANNEL via MIDI. * The MIDI indicator will light. * If you want to use the SD-80 in MIDI mode, disconnect the USB cable from the SD-80's USB connector. MIDI interface...
IN 1 connector will be retransmitted without change from the MIDI OUT 2 connector. If the SD-80 is operating in USB mode and this switch is set to [IN1 THRU], MIDI messages received at the MIDI IN 1 connector will be "thru-ed" from the MIDI OUT 2 connector. The MIDI messages that would normally be output from the computer to the MIDI OUT 2 connector will no longer be output.
Using the internal sound generator Switching the sound generator mode Here’s how to switch the sound generator mode. The sound generator mode can be switched from the front panel, or by MIDI messages from an external device. Please be aware that the sound generator will be initialized when you switch the sound generator mode.
Selecting a part Here’s how to select the part that you want to edit. fig.5-03 Press [INST]. The button will light. fig.5-03a_67.2 Press [PART ] or [PART ] to select the part to be edited. The number of the part currently being edited is indicated at the bottom of the display.
Using the internal sound generator Selecting the type of part (INST/DRUM) Here’s how to select the type (Part Mode) for each part. * Inst Type can be executed only if the sound generator mode is GM2 mode or Native mode. fig.5-04 Press [INST].
Selecting the sound set In GM2 mode you can choose one of four different sound sets. In Native mode you can choose one of six different sound sets. fig.5-05 Press [INST]. The button will light. fig.5-05a_67.2 Press [PAGE ] until the display indicates Inst Set. Turn the [VALUE] dial to select the desired sound set.
Inst. For details on how to set the part type to Inst, refer to "Selecting the type of part (INST/DRUM)" (p. 24). On the SD-80, the sound of an Inst part is specified by two numbers: an Instrument number and a Variation number. There are 128 sounds whose variation number is 000, and these make up the basic sounds of the SD-80.
Selecting a drum set If the part type is Drum Set, use the following procedure to select a drum set. First make sure that the part type is Drum. For details on how to set the part type to Drum, refer to "Selecting the type of part (INST/ DRUM)"...
You can “mute” a specified part so that it will not sound. This is convenient when you want to play along to a backing provided by the SD-80 (“minus-one” playing). Conversely, you can “solo” a specified part so that the remaining parts will be muted.
■ Soloing a part When multiple parts are sounding, you can cause only the currently selected part to sound, allowing you to check the performance of that part. This is referred to as “soloing” the part. fig.5-09 Press [INST]. The button will light. Press [PART ] or [PART ] to select the part that you want to solo.
“editing.” If you are using the SD-80 in GM2 mode or Native mode, some of the Part parameter values can be edited from the panel of the SD-80 itself. In other modes, parameter values cannot be edited from the panel of the SD-80.
Parameters can be controlled from the SD-80's panel only in GM2 mode and Native mode. Of the parameters that can be controlled from the SD-80, only MFX settings that were edited in Native mode can be saved within the SD-80 as a user patch ("Saving a patch" (p. 50)).
Using the internal sound generator ■ Editing parameters that are common to all parts Here’s an example of how to edit parameters that are common to all parts. fig.5-12 Simultaneously press [PART ] and [PART ]. A screen will appear in which you can edit parameters for all parts. fig.5-12a_67.2 Press [PAGE ] or [PAGE ] to select the parameter that you want to edit (e.g., Master Volume).
Master Fine Tuning On the SD-80, parameter values are specified for the Part. In other words, these parameters belong to the part, and not to the sound (instrument). For example, if you set Vibrato Rate to +20 and then select a different sound for that part, the Vibrato Rate of the newly selected sound will stay at +20, and will not be the default setting of +/-0.
Page 34
Filter You can adjust the tonal character of the sound by editing the filter values. The filters of the SD-80 are a type called Low Pass Filters, which pass the region of sound that lies below a specified frequency. This frequency is called the Cutoff Frequency.
Page 35
Envelope fig.p8-3j The sound of a musical instrument changes over time from the moment the note begins until it ends. Such change can be expressed by the graph shown below. The shape of this change is distinctive of that particular instrument, and is an important factor that allows us to recognize the type of instrument.
Page 36
Using the internal sound generator Vibrato fig.p7-1j Vibrato is an effect that cyclically modulates the pitch. By applying vibrato, you can make your performance more expressive. Vibrato Rate [cc#76] This adjusts the speed (frequency) at which the pitch is modulated. Positive (+) settings will speed up the modulation, and negative (-) settings will slow down the modulation.
■ Part parameters (Native mode) In addition to the Part parameters described in the preceding pages, Native mode also allows you to adjust the following parameters. Rx Channel (Receive channel) This specifies the MIDI channel that is assigned to the part. If this is turned OFF for a part, all MIDI messages other than system exclusive messages will be ignored by that part, meaning that it will not sound.
Master Fine Tuning When you are playing in an ensemble with other instruments, or want to adjust the SD-80 to the tuning of another instrument, you can adjust the Master Tuning in a range from 415.3 Hz to 466.2 Hz. The displayed value (for example 440.0 Hz) is the frequency of the A4 note (note number 69).
Using the effects of the internal sound generator About the sound generator effects The SD-80 contains the following four effects processors, and each can be set independently. Chorus Chorus is an effect that adds depth and spaciousness to the sound.
Using the effects of the internal sound generator Editing the sound generator effects You can edit the sound generator effects when the sound generator mode is either GM2 mode or Native mode. fig.6-01b Switch the sound generator to GM2 mode or Native mode. For details on switching the sound generator mode, refer to "Switching the sound generator mode"...
The sound generator effect parameters that can be edited using the SD-80’s controls will differ depending on the sound generator mode (GM2 or Native). In the SD-80’s GM2 mode, you can edit the reverb and chorus parameters. The following parameters can be edited.
Using the effects of the internal sound generator Mod Rate (Modulation Rate) Specifies the speed (frequency) at which the chorus sound will be modulated. Higher settings produce faster modulation. Mod Depth (Modulation Depth) Specifies the depth of modulation for the chorus sound. Higher settings will produce deeper modulation. Feedback Specifies the level of the chorus sound that will be re-input to the chorus (i.e., the amount of feedback).
Parameters that can be edited in Native mode The sound generator effect parameters that can be edited using the front panel of the SD-80 will differ depending on the sound generator mode (GM2 or Native mode). In the SD-80’s Native mode, you can edit the parameters of the two system effects and three MFX (multi-effects).
Page 44
Using the effects of the internal sound generator HF Damp (Reverb/Delay HF Damp) Specifies the frequency above which the high-frequency component of the reverb sound will be cut. Lowering this value will cause a greater portion of the high-frequency range to be cut, producing a softer- toned reverb sound.
■ Chorus (System Effect) On the SD-80, the chorus section can also be used as a delay. Here you can edit parameters that select either chorus or delay, and specify how the chorus/delay sound will be heard and output. Chorus Type Selection for the type of chorus (or delay).
Using the effects of the internal sound generator Phase Specifies the spaciousness of the chorus sound. Pre Delay (Chorus Pre Delay) Specifies the amount of time that is to pass after the original sound has been heard before the chorus sound is heard.
Page 47
MFX A-C Chorus Send Level (Multi-effect A–C Chorus Send Level)0–127 Specifies the level at which the signal processed by the multi-effect will be sent to the Chorus effect. MFX A-C Reverb Send Level (Multi-effect A–C Reverb Send Level)0–127 Specifies the level at which the signal processed by the multi-effect will be sent to the Reverb effect. MFX A-C Control 1-4 Source (MFX A–C Control 1–4 Source) Specifies the control source that will modify the multi-effect parameter, and the sensitivity of the control.
Using the effects of the internal sound generator Specifying the output destination of the part PART OUTPUT ASSIGN Specify where the output signal of the part will be sent. Output to MFX. MFX: Output the unprocessed sound from OUTPUT 1, without using MFX. Output the unprocessed sound from OUTPUT 2, without using MFX.
System-related settings This chapter explains how to make settings that affect the entire system of the SD-80. Here’s the basic procedure for setting these parameters. fig.7-1 Press [SYSTEM]. The button will light. Press [PAGE ] or [PAGE ] until the item you want to edit appears in the display.
If you have edited the multi-effect (MFX) settings of a sound in Native mode, your changes will be lost when you turn off the power of the SD-80. Thus, you can save MFX settings for each sound as a user patch in the SD-80's user memory.
All 128 user patches and 16 user drum sets will be transmitted as bulk data. The transmitted data can be recorded by your sequencer software, or the like. If you transmit this recorded data back to the SD-80, all user patches and rhythm sets will be overwritten. Do not turn off the power while the settings are being written (while the display indicates "Saving...").
Setting the system tempo System Tempo fig.7-1h This sets the tempo of the entire SD-80 system. When you set the Delay Time of an internal sound generator effect (MFX) to Clock (Tempo), it will follow the tempo you specify here.
Features of Native mode Native mode allows you to take full advantage of the SD-80’s sound generator structure. Use this mode when you want to edit the internal sounds or MFX in greater detail. Although this mode lets you control parameters that cannot be edited in other modes, operations in Native mode are not compatible with GM2.
Page 54
Controlling the SD-80 via MIDI • A greater number of the Part parameters can be edited from the SD-80. • When creating song data, you can select sounds from the Classical/Contemporary/Solo/Enhanced sound sets simply by specifying the Bank MSB/LSB and Program Number.
96 (60H) = Classical set 97 (61H) = Contemporary set 98 (62H) = Solo set 99 (63H) = Enhanced set 87 (57H) = User set Controlling the SD-80 via MIDI GM2 Instrument Set Select MIDI Multitimbre Part Part Inst Set...
Controlling the SD-80 via MIDI ■ Switching the type of part Switching the Part Mode in GM2 mode In GM2, transmit a Bank Select message to switch the Part Mode. MIDI bank number: Switching the Part Mode in Native mode In Native mode, transmit a Bank Select message to switch the Part mode.
Page 57
Send a message that causes the sound generator to switch to XGlite mode (F0 43 10 4C 00 00 7E 00 F7), and then use a Bank Select message to select the sound ("Switching sounds" (p. 58)). Actual part Part number Part9 Part10 Part11 Part12 Part13 Part14 Part15 Part16 Controlling the SD-80 via MIDI...
Controlling the SD-80 via MIDI ■ Switching sounds You can switch the sound (instrument) for each of the SD-80’s parts by transmitting MIDI messages from sequencer software running on your computer. Sounds are specified by their Variation number and Instrument number, but the way in which these numbers are displayed may differ depending on your software.
Page 59
* Leave the bank select LSB set at 0. Actual transmission of MIDI messages When you input MIDI messages into sequencer software on your computer for transmission to the SD-80, send the messages in the following order. Value of control change 0:...
Page 60
Value of control change 0: Value of control change 32: Value of program change: About the bank select lower byte (LSB) The SD-80 processes the lower byte (LSB) of the bank select message as follows: Number Processing Follows the currently-valid GS mode.
The types of drum set built into the SD-80 are listed by number and name in the drum set list for each sound generator mode. The type of sound included in the drum set is also listed by number and name.
Page 62
Controlling the SD-80 via MIDI Switching drum sets in Native mode Transmit bank select LSB (CC#32) and program change (PC#). * Bank select MSB (CC#0) is used to switch the Part Mode. Inst part and Drum part correspond to the following numbers.
F0 7F 10 04 05 01 01 01 02 01 00 03 F7 VV (setting) Small Room Medium Room Large Room Medium Hall Large Hall Plate 00–7F (0–127) VV (setting) Chorus1 Chorus2 Chorus3 Chorus4 FB Chorus Flanger 00–7F (0–127) Controlling the SD-80 via MIDI...
Page 64
Controlling the SD-80 via MIDI Changing the MFX type (Native mode) fig.8-04_99 To change the effect type of the enhanced sounds selected for parts 1–3, transmit the following system exclusive message. Address (p1 p2): when changing the insertion effect of part 1 = 11 00...
Page 65
Data: 00 (Output Assign = MFX) Checksum (ss): For details on the calculation method, refer to “How to calculate the checksum” in “MIDI Implementation” (MIDIImp_E.pdf) on the included CD-ROM. Controlling the SD-80 via MIDI Part Temporary Part Output Multitimbre MFX Select...
Page 66
Controlling the SD-80 via MIDI fig.8-07_99 Transmit “Part Output MFX Select” to specify the MFX (MFX A–MFX C) to which the part output will be sent. Address (pp): when you want part 1 to use the MFX =20 when you want part 2 to use the MFX =21...
Page 68
Controlling the SD-80 via MIDI <Example> Editing the MFX of part 3 If MFX type=18:Mod Delay is applied to the sound of part 3 and you want to change its DLY Right setting (parameter number 02) to 80 (=50H), transmit the following system exclusive data.
■ Writing/loading SD-80 settings The SD-80 is able to transmit the settings of its sound generator as MIDI data. Two types of data can be transmitted: Bulk data, which transmits a group of parameters; and Individual data, which transmits a single parameter.
Page 70
Controlling the SD-80 via MIDI Transmitting individual data Individual data can be transmitted in each editing screen. fig.8-3a In each editing screen, select the parameter that you want to transmit, and specify its value. Hold down [SHIFT] and press [ENTER]. The highlighted parameter value will be...
Troubleshooting If the SD-80 does not function as you expect, please check the following points first. If this does not resolve the problem, please contact a Roland Service Center (refer to the back cover). ■ Power won’t come on ● Is the power cord of the SD-80 correctly connected to the AC outlet and to the SD-80? Make the correct connections.
Page 72
● Does the PART level meter move in the display? If the PART level meter is moving, the SD-80 is receiving MIDI data correctly. Check the setting of the volume knobs and the cable connections once again. ● Is the part muted? If the display indicates ❑, that part has been muted.
Page 73
OUT 2 ● If you set the MIDI OUT/THRU switch to the [IN1 THRU] position while the SD-80 is operating in USB mode, the MIDI messages input to the MIDI IN 1 connector will be retransmitted without change from the MIDI OUT 2 connector.
Page 74
■ You want to initialize the sound generator mode each time the power is turned on ● When the SD-80 is turned on, it is initialized to the sound generator mode specified in "Specifying the start-up sound generator mode" (p. 51) ●...
Appendices ■ Parameters common to all parts (Native mode) Parameter SYSTEM Control 1–4 MFX Sw Chorus Sw Reverb Sw Scale Tune Sw System Control MFX Switch Chorus Switch Reverb Switch Scale Tune Switch Value OFF, CC01–31, 33–95, BEND, AFT OFF, ON OFF, ON OFF, ON OFF, ON...
Effect parameter list ■ Effect parameter (GM2 mode) Reverb (System Effect) Parameter Reverb Type Reverb Time Chorus (System Effect) Parameter Chorus Type Mod Rate Mod Depth Feedback Send to Reverb EQ (Equalizer) Parameter EQ Switch EQL Low Frequency EQR Low Frequency EQL Low Gain EQR Low Gain EQL High Frequency...
Page 91
78:Guitar Amp Simulator Parameter Setting Value AmpSim Switch OFF, ON Amp Type (*1) Amp Volume 0 - 127 Amp Master 0 - 127 Amp Gain LOW, MID, HIGH Amp Presence 0 - 127 (Match Drive: -127 - 0) Amp Bright OFF, ON Amp Bass 0 - 127...
Page 92
Appendices 83:Guitar Multi C Parameter Setting Value OD/DS Switch OFF, ON OD/DS Type OVERDRIVE, DISTORTION OD/DS Drive 0 - 127 OD/DS Tone 0 - 127 OD/DS Level 0 - 127 AW Switch OFF, ON AW FilterType LPF, BPF AW Rate 0.05 - 10.00 Hz, note*2 AW Depth 0 - 127...
Page 93
86:Bass Multi Parameter Setting Value COMP Switch OFF, ON COMP Attack 0 - 127 COMP Sustain 0 - 127 COMP Level 0 - 127 OD/DS Switch OFF, ON OD/DS Type OVERDRIVE,DISTORTION OD/DS Drive 0 - 127 OD/DS Level 0 - 127 AmpSim Switch OFF, ON AmpSim Type SMALL, BUILT-IN,2-STACK...
Instrument list (GM2 / Native mode) Piano PC LSB Classic Set Voices Piano 1 Piano 1w Piano 1d Piano 2 Piano 2w Piano 3 Piano 3w Honky-tonk Honky-tonk w E.Piano 1 Detuned EP1 Dyno Rhodes 60’s E.Piano E.Piano 2 Detuned EP2 E.Piano 2v EP Legend EP Phase...
Page 96
Appendices Guitar PC LSB Classic Set Voices Nylon Gt Ukulele Nylon o Nylon Gt.2 Steel-str.Gt 12-Str.Gt Mandolin Steel+Body Jazz Gt Pedal Steel Clean Rear Clean Half Mid Tone Gt Muted Gt Funk Gt Funk Gt 2 Jazz Man Overdrive Gt Gt.Pinch DistortionGt Feedback Gt...
Page 97
Ensemble PC LSB Classic Set Voices Strings Orchestra 60’Strings Slow Strings Syn.Strings1 Syn.Strings3 Syn.Strings2 Choir Aahs Choir Aahs 2 Voices Oohs Hamming SynVox Ana Voices Orchestrahit Bass Hit 6th Hit Euro Hit Brass PC LSB Classic Set Voices Trumpet Dark Trumpet Trombone Trombone 2 Brite Bone...
Page 98
Appendices Synth lead PC LSB Classic Set Voices Square Wave Square Sine Wave Saw Wave Doctor Solo Natural Lead SequencedSaw 2 Syn.Calliope Chiffer Lead Charang Wire Lead Solo Vox 5th SawWave Bass & Lead DelayedLead Synth pad, etc. PC LSB Classic Set Voices Fantasia...
Page 99
Percussive PC LSB Classic Set Voices Tinkle Bell Agogo Steel Drums Woodblock Castanet Taiko Concert BD Melo.Tom 1 Melo.Tom 2 Synth Drum 808 tom Elec Perc Reverse Cym PC LSB Classic Set Voices GtFret Noise Gt.Cut Noise Slap_St.Bass Breath Noise Fl.Key Click Seashore Rain...
Appendices Instrument list (Special sound) * The asterisk (*) indicates that the same sound is used for the Enhanced sound set in GM2/Native mode. PC LSB MSB Special 1 Set Voice D.L.A.Pad BrushingSaw Xtremities Atmostrings Noo Tongs Mistery EastrnEurope Harpsi&Str Shout Gt Clean Chorus Mid Boost Gt...
Instrument list (GS mode) Piano CC00 GS Set Voices Piano 1 Piano 1w Piano 1d Piano 2 Piano 2w Piano 3 Piano 3w Honky-tonk HonkyTonk w E.Piano 1 Detuned EP1 E.Piano 1v 60s E.Piano E.Piano 2 Detuned EP2 E.Piano 2v Harpsichord Coupled Hps Harpsi.w...
Page 102
Appendices Synth lead CC00 GS Map Voices Square Wave Square Sine Wave Saw Wave Doctor Solo SynCalliope ChifferLead Charang Solo Vox 5th Saw Bass & Lead Synth pad, etc. CC00 GS Set Voices Fantasia Warm Pad Polysynth Space Voice Bowed Glass Metal Pad Halo Pad Sweep Pad...
Instrument list (XGlite mode) * The instrument names listed here are the proper names for the XGlite sound module mode. Due to the limited number of letters that can be used for the display, the names shown in the display may be slightly different from the instrument names listed here. Piano CC32 XG Set...
Page 104
Appendices Brass CC32 XG Set Elements Trumpet Warm Trumpet Trombone Trombone 2 Tuba Muted Trumpet French Horn French Horn Solo French Horn 2 Horn Orchestra Brass Section Trumpet & Trombone Section Synth Brass 1 Resonant Synth Brass Synth Brass 2 Soft Brass Choir Brass Reed...
Drum set list (GM2 / Native mode) Classical Set Standard Set Room Set Power Set Electric Set Analog Set Jazz Set Brush Set OrchestraSet SFX Set Contemporary Set StandardSet2 Room Set 2 Power Set 2 Dance Set Rave Set Jazz Set 2 Brush Set 2 <- <-...
Appendices ■ Classical set drum set (1) * BANK MSB=104, LSB=0 fig.drum24-87 PC 1 PC 9 Standard Set Room Set High Q <- Slap <- Scratch Push <- Scratch Pull <- Sticks <- Square Click <- Metron Click <- Metron Bell <- Kick Drum 2 <-...
■ Classical set drum set (2) * BANK MSB=104, LSB=0 fig.drum24-87 PC 33 PC 41 Jazz Set Brush Set <- <- <- <- <- <- <- <- <- <- <- <- <- <- <- <- Jazz Kick 2 Jazz Kick 2 Jazz Kick 1 Jazz Kick 1 <-...
Appendices ■ Contemporary set drum set (1) * BANK MSB=105, LSB=0 fig.drum24-87 PC 1 PC 9 Standard Set2 Room Set 2 High Q <- Slap <- Scratch Push <- Scratch Pull <- Sticks <- Square Click <- Metron Click <- Metron Bell <- Kick Drum 2...
■ Contemporary set drum set (1) * BANK MSB=105, LSB=0 fig.drum24-87 PC 33 PC 41 Jazz Set 2 Brush Set 2 <- <- <- <- <- <- <- <- <- <- <- <- <- <- <- <- Jazz Kick 2 Jazz Kick 2 Jazz Kick 1 Jazz Kick 1...
Appendices ■ Solo set drum set (1) * BANK MSB=106, LSB=0 fig.drum24-87 PC 1 PC 9 St.Standard St.Room High Q <- Slap <- Scratch Push <- Scratch Pull <- Sticks <- Square Click <- Metron Click <- Metron Bell <- Kick Drum 2 Rock Kick Dr Kick Drum 1...
■ Solo set drum set (2) * BANK MSB=106, LSB=0 fig.drum24-87 PC 33 PC 41 St.Jazz St.Brush <- <- <- <- <- <- <- <- <- <- <- <- <- <- <- <- Jazz Kick 2 Jazz Kick 2 Jazz Kick 1 Jazz Kick 1 <- <-...
Appendices ■ Enhanced set drum set (1) * BANK MSB=107, LSB=0 fig.drum24-87 PC 1 Amb.Standard High Q Slap Scratch Push Scratch Pull Sticks Square Click Metron Click Metron Bell Kick Drum 2 Kick Drum 1 Side Stick Snare Drum 1 Hand Clap Snare Drum 2 Low Tom 2...
Appendices Drum set list (GS mode) * The instrument names listed here are the proper names for the XGlite sound module mode. Due to the limited number of letters that can be used for the display, the names shown in the display may be slightly different from the instrument names listed here. GS Set STANDARD ROOM...
Drum set list (XGlite mode) * The instrument names listed here are the proper names for the XGlite sound module mode. Due to the limited number of letters that can be used for the display, the names shown in the display may be slightly different from the instrument names listed here.
fig.drum72-84 PC001 PC002 Standard Kit Standard Kit 2 Samba Whistle L <- Guiro Short <- Guiro Long <- Claves <- Wood Block H <- Wood Block L <- Cuica Mute <- Cuica Open <- Triangle Mute <- Triangle Open <- Shaker <- Jingle Bells...
Page 120
Appendices fig.drum53-84 PC001 PC026 Standard Kit Analog Kit Ride Cymbal Cup <- Tambourine <- Splash Cymbal <- Cowbell Cowbell Analog Crash Cymbal 2 <- Vibraslap <- Ride Cymbal 2 <- Bongo H <- Bongo L <- Conga H Mute Conga Analog H Conga H Open Conga Analog M Conga L...
INDEX AC IN Connector ... 12 Adobe Acrobat Reader ... 9 Bulk Dump ... 51, 69 capital sound ... 26 checksum ... 73 Chorus ... 16, 39, 41, 45 Classical ... 17 Contemporary ... 17 Contrast ... 15 Control Output ... 51 demo songs ...
Page 126
INDEX Reverb ... 16, 39, 41, 43 SHIFT Button ... 11 Solo ... 17 soloing ... 29 sound ... 26 sound generator mode ... 16, 22, 53 sound set ... 25, 55 Special ... 17 synthesizer ... 54 SysEX Device ID ... 51 SYSTEM Button ...
Page 127
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 128
Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below. HONG KONG EUROPE Parsons Music Ltd. EDIROL (Europe) Ltd. 8th Floor, Railway Plaza, 39 Studio 3.4 114 Power Road Chatham Road South, T.S.T,...