Gate Reverb - Roland SC-8820 Owner's Manual

Effects
26: Reverb
The Reverb effect adds reverberation to the sound,
simulating an acoustic space.
fig.9-29
L
R
Type (ReverbType)
Room1/2/Stage1/2/Hall1/2 [1 (40 03 03)]
Selects the type of Reverb effect.
Room1: dense reverb with short decay
Room2: sparse reverb with short decay
Stage1: reverb with greater late reverberation
Stage2: reverb with strong early reflections
Hall1: reverb with clear reverberance
Hall2: reverb with rich reverberance
Pre Dly (Pre Delay Time)
Adjusts the time delay from when the direct sound begins
until the reverb sound is heard.
+Time (Reverb Time)
Adjusts the time length of reverberation.
HF Damp
Adjusts the frequency above which the reverberant sound
will be cut. As the frequency is set lower, more of the high
frequencies will be cut, resulting in a softer and more
muted reverberance. If you do not want the high
frequencies to be cut, set this parameter to Bypass.
#Balance (Effect Balance)100:0–0:100(D:E) [16 (40 03 12)]
Adjusts the volume balance between the direct and the
processed sound.
"D" and "E" stand for "direct sound" and "effect sound"
respectively.
Low Gain
Adjusts the gain of the low frequency range.
Hi Gain (High Gain)
Adjusts the gain of the high frequency range.
Level (Output Level)
Adjusts the output level.
60
[01H, 55H]
EQ
Balance
Reverb
EQ
0–100ms [2 (40 03 04)]
0–127 [3 (40 03 05)]
315–8k/Bypass [4 (40 03 06)]
-12–+12 [17 (40 03 13)]
-12–+12 [18 (40 03 14)]
0–127 [20 (40 03 16)]

27: Gate Reverb

Gate Reverb is a special type of reverb in which the rever-
berant sound is cut off before its natural length.
fig.9-30
L
R
Type (Gate Reverb Type)
Norm/Reverse/Sweep1/2 [1 (40 03 03)]
Selects the type of reverb.
Norm: conventional gate reverb
Reverse: backwards reverb
Sweep1: the reverberant sound moves from right to
left
Sweep2: the reverberant sound moves from left to
right
Pre Dly (Pre Delay Time)
Adjusts the time delay from when the direct sound begins
until the reverb sound is heard.
Gate Time
Adjusts the time from when the reverb is heard until when
it disappears.
+Balance (Effect Balance)100:0–0:100(D:E) [16 (40 03 12)]
Adjusts the volume balance between the direct and the
processed sound.
"D" and "E" stand for "direct sound" and "effect sound"
respectively.
Low Gain
Adjusts the gain of the low frequency range.
Hi Gain (High Gain)
Adjusts the gain of the high frequency range.
#Level (Output Level)
Adjusts the output level.
[01H, 56H]
EQ
Balance
Reverb
EQ
0–100ms [2 (40 03 04)]
5–500ms [3 (40 03 05)]
-12–+12 [17 (40 03 13)]
-12–+12 [18 (40 03 14)]
0–127 [20 (40 03 16)]