Table of Contents
Advertisement
Hearthstone Quality Home Heating Products, Inc
Follow the instructions given to set P1 ON time.
Setting P2 Off Time
While the time of day is still flashing , briefly
press SET to scroll to TIMER mode P2
(moon).
Follow the instructions given to set P1 OFF
time.
Programming Example:
f i r e - p a r t s . c o m
Tip
If you want to program only one period, program
P1 d a y and P1
night
program P2 day and P2 night with
time.
AUTOMATIC TURNDOWN
No communication. If there is no
communication between the receiver and the
with desired times and
the
same
handset for a period of 6 hours, the appliance
goes into pilot mode.
No change in flame height. If there is no
change in flame height for a period of 6
hours, the appliance goes into pilot mode.
NOTE: In TEMP or TIMER modes, the flame
height will vary according to room
temperature. The appliance will continue to
work normally. However, if the room
temperature remains the same for 6 hours,
the appliance will go into pilot mode.
AUTOMATIC SHUT OFF
Low batteries in the receiver. With low
battery power in the receiver the system
shuts off completely.
NOTE: This does not apply when the power
supply is interrupted.
No change in pilot. The appliance shuts
off completely when it is continually in pilot
position— without any change—for a
period of 5 days.
LOW BATTERY INDICATION
Remote handset: The battery icon
will show when the battery needs to be
replaced.
Replace with one 3 "AAA" alkaline batteries.
Receiver: Three short 'beeps' will sound when
the motor turns when the batteries need to be
replaced. Replace with four 1.5 V alkaline
batteries.
HANDSET / RECEIVER MATCH
The remote control handset and receiver are
program- med to function together. In case of a
replacement of the handset or the receiver, you
will need to reset the receiver to allow them to
function together. Contact your dealer for
details.
ECLIPSE VF 8906
27
Advertisement
Table of Contents
