Table of Contents
Advertisement
English
NOTICE:
The Zone Select feature must to be preprogrammed
to the 3-position A-B-C switch, while the Enhanced
Zone Bank feature must be preprogrammed to any
side button or Top (Orange) button before you can
use this feature.
1 Press the preprogrammed EZB Up or EZB Down
button to scroll the EZB up or down or press and
hold the preprogrammed EZB Up or EZB Down
button to fast scroll the EZB up or down.
2 Turn the 3-Position A/B/C Switch to select the first,
second or third zone in the selected EZB.
Enabling and Disabling the Radio Alias
This feature allows you to display or hide the radio alias
(name).
Press the Menu Select button directly below MyID.
The display shows momentary Radio ID off, and the
radio alias disappears from the Home screen or the display
shows momentary Radio ID on, and the radio alias
appears on the Home screen.
160
Controlling the Display Backlight
You can enable or disable the radio display backlight as
needed, if poor light conditions make the display or keypad
difficult to read.
Depending on how your radio is preprogrammed, you can
also maintain a minimum backlight level on the radio front
display.
NOTICE:
The backlight setting also affects the Menu Select
buttons and Navigation button backlighting
accordingly.
The backlight remains on for a preprogrammed time
before it automatically turns off completely or
returns to the minimum backlight level.
The preprogrammed Light/Flip button of the
accessories connected to the radio such as Display
Remote Speaker Microphone (DRSM) is disabled
when the radio is in Night Vision Goggles (NVG)
display mode.
Perform one of the following actions:
•
To toggle the backlight on or off, press the
preprogrammed Light/Flip button.
Advertisement
Table of Contents
