Removing C Series Modules; Connecting The Ni-9147; Connecting The Ni-9147 To Ground - National Instruments NI-9147 Getting Started

1. Verify that power is not connected to the I/O connector(s) on the C Series
module. If the system is in a nonhazardous location, the NI-9147 can be
powered on when you install modules.
2. Press the latches on the C Series module.
3. Align the C Series module with a slot and seat it in the slot until the latches
lock in place.

Removing C Series Modules

Verify that power is not connected to the I/O connector(s) on the C Series module
before you remove a module from the NI-9147. If the system is in a nonhazardous
location, the NI-9147 can be powered on when you remove modules.

Connecting the NI-9147

The NI-9147 has the following connectors, LEDs, and buttons.

Connecting the NI-9147 to Ground

You must connect the NI-9147 grounding terminal to the grounding electrode
system of the facility.
8
ni.com
NI-9147 Getting Started
2
1
1
2