Preparing The Environment; Unpacking The Kit - National Instruments NI-9147 Getting Started

Notice
install the product in a shielded enclosure with shielded and/or filtered
power and input/output ports. In addition, take precautions when
designing, selecting, and installing measurement probes and cables to
ensure that the desired EMC performance is attained.

Preparing the Environment

Ensure that the environment in which you are using the NI-9147 meets the following
specifications.
Operating temperature (IEC 60068-2-1, IEC 60068-2-2)
Operating humidity (IEC 60068-2-78)
Pollution Degree
Maximum altitude
Indoor use only.
Note
Refer to the device specifications on
specifications.

Unpacking the Kit

Notice
device, ground yourself using a grounding strap or by holding a grounded
object, such as your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose
components or any other sign of damage.
Notice
6
ni.com
In order to meet the EMC requirements for marine applications,
To prevent electrostatic discharge (ESD) from damaging the
Never touch the exposed pins of connectors.
NI-9147 Getting Started
-40 °C to 70 °C
10% RH to 90% RH, noncondensing
2
5,000 m
ni.com/manuals for complete