Interconnecting The Ni 5663E Modules - National Instruments PXIe-5663E Getting Started

Figure 2. Chassis Compatibility Symbols
1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot
6. Touch any metal part of the chassis to discharge static electricity.
7. Ensure that the ejector handle is in the downward (unlatched) position.
8. Place the module edges into the module guides at the top and bottom of the
chassis. Slide the module into the slot until it is fully inserted.
9. Latch the module in place by pulling up on the ejector handle.
10. Secure the module front panel to the chassis using the front-panel mounting
screws.
Note
mechanical stability and also electrically connects the front panel to
the chassis, which can improve the signal quality and
electromagnetic performance.
11. Cover all empty slots using filler panels or fill using slot blockers to maximize
cooling air flow.
12. Power on the chassis.

Interconnecting the NI 5663E Modules

Caution
damaged if subjected to ESD. To prevent damage, remove power from the
10
ni.com
NI PXIe-1062Q
Tightening the top and bottom mounting screws increases
The signal pins of this product's input/output ports can be
1 2 3 4
PXIe-5663E Getting Started
5