Cooling Module Connection - EWM Tetrix 300 Classic Operating Instructions Manual

Design and function

Cooling module connection

5.5 Cooling module connection
Observe the fitting and connection instructions given in the relevant operating
instructions for the cooling unit.
Item Symbol Description
1
2
3
Control and supply lead to the welding machine
The cooling module and welding machine are connected using two leads.
• Insert the control lead plug on the welding machine.
• Insert the power supply lead plug on the welding machine.
24
0
8-pole connection socket
Cooling unit control lead
4-pole connection socket
Cooling unit voltage supply
Cooling module
NOTE
Figure 5-2
099-000098-EW501
03.08.2011