Foot-Operated Remote Control Rtf 1 - EWM Tetrix 300 Classic Operating Instructions Manual

Design and function
Remote control
5.9.6

Foot-operated remote control RTF 1

ActivArc welding is not possible in combination with the RTF 1 foot-operated remote control.
Symbol Meaning
Actuate foot-operated remote control (start welding process)
Operate foot-operated remote control (set welding current according to application)
Release foot-operated remote control (end welding process)
FFr RTF ramp function
on
off
The RTF ramp function can be switched on and off in the machine control sub-menu
(see "Advanced settings > ramp function RTF" chapter).
52
Functions
• Infinitely adjustable welding current (0% to 100%) depending on the preselected
main current on the welding machine.
• Start/stop welding operation (TIG)
FFr > off
I
FFr > on
I
start
Welding current runs in a ramp function at the specified main current
Welding current goes immediately to the specified main current
Figure 5-22
NOTE
I
end
t
099-000098-EW501
03.08.2011