Connecting The Printer; Network Connection - Ricoh AP410 Setup Manual

Connecting the Printer

Network Connection

Follow the procedure below to connect the printer to the computer through the
network. Prepare the hub and other network devices before connecting the 10
BASE-T or 100 BASE-TX cable to the machine's Ethernet port.
❒ Use shielded Ethernet cable. Unshielded cables create electromagnetic inter-
ference that could cause malfunctions.
❒ Ethernet cable is not supplied with this machine. Select your cable according
to the network environment.
A
The network interface cable loop should be about 15 cm (5.9 inches) ( )
from the end of the cable (on the end closet to the printer).
B
Connect the Ethernet cable to the Ethernet port.
For basic model printer, connect the Ethernet cable to the network interface
board.
G1128605_0.00
82
Copyright © 2004