Guide To The Printer; Exterior - Ricoh AP410 Setup Manual

Ricoh ap410: setup guide

Hide thumbs Also See for AP410:

Table of Contents

Guide to the Printer

Paper Size Dial

Adjust this dial to match the size and feed direction of the paper loaded in the paper tray.

Bypass Tray Extension

Pull out this extension to load paper into the Bypass Tray when its length is longer than

B5K.

Bypass Tray

Use to print onto thick paper, OHP transparencies, adhesive labels, envelopes as well

as plain paper. When printing on custom paper size, printer driver settings are required.

Up to 100 sheets of plain paper (80 g/m

See "Paper and Other Media Supported by this Printer" and " Loading Paper in the By-

pass Tray", Maintenance Guide.

Control Panel

Contains keys for the printer operation and a panel display that shows the printer status.

Output Tray (Standard Tray)

Printed output is stacked here with the print side facing down.

Paper Exit Cover

Open this cover to remove misfed paper.

Ventilator

This hole helps to keep components inside the printer from overheating.

❒ Do not block or obstruct the ventilator. A malfunction may occur due to over-

heating.

G1128605_0.00

, 20 lb.) can be loaded.

Table of Contents