Ricoh AP410 Setup Manual page 28

Setting Up
C
Load the new paper into paper tray with print side up.
❒ Confirm that the top of the stack is not higher than the limit mark inside the
tray.
❒ Confirm that the paper fits under the rear guide.
D
Carefully slide the paper tray into the printer until it stops.
❒ Confirm that the setting of the paper size dial matches the sizes and feed
direction of the paper in the tray. Otherwise, the printer might be damaged
or a printing problem might occur.
❒ Do not slide the paper tray in and out with force. If you do, the front and
side paper guides will move out the place.
For details about usable types of paper, see "Loading Paper", Maintenance
Guide.
28